My involvement on this project was divided into three categories: Set Designing the clear acrylic boxes onto which the laser cut facades were attached, drawing in AutoCAD © the layouts of the laser cut facades, and working as model maker building roof and other details.
This first group are some of the Set Designs for the clear boxes that made up most of the buildings.

This is the miniature set. It covered about 2,500 square feet, filling the large stage at Boss Film.
Video Clip 1
- Video Clip 2
Plan and elevations of diamond building.
AutoCAD © R12, 1992
Plan and elevations of three pentagon buildings.
AutoCAD © R12, 1992
Elevations of step building 1.
AutoCAD © R12, 1992
Elevations of step building 2.
AutoCAD © R12, 1992
Below are a small sample of the dozens of layouts I designed for laser cutting. They are all equally exciting but look similar to these. If you would like to see more, send an E-mail

Elevations of step building 2.
AutoCAD © R12, 1992

Elevations of step building 2.
AutoCAD © R12, 1992

Elevations of step building 2.
AutoCAD © R12, 1992

Elevations of step building 2.
AutoCAD © R12, 1992

Laser cut facade for step building 2.
AutoCAD © R12, 1992
![]() |
This page last updated 7-1-04This site maintained by Kenneth A. Larson.Copyright © 2000, 2001, 2003, 2004, Kenneth A. Larson. All Rights Reserved. Website content including photographic and graphic images may not be redistributed for use on another website. |
|
| Top | Home | Set Design | Theme Parks | Set Design for Visual Effects | Model Making for Visual Effects |